Factory Price Common Type Car Sanding Room Automotive Polishing Booth Preparation Station Spray Paint Booth with CE Standard

Product Description

Ventilation of the sanding booth 
LONGXIANG sanding booth  has several ventilation systems which provide better painting conditions. All the filter systems and air exhaust systems underneath create a efficiently vertical air flow; and this air flow distribute inside of the booth evenly; then this air flow make overspray removing away from the vehicle immediately and completely.

 

Air recirculation on baking model

100% of the air produced by the fan is transported into LONGXIANG sanding booth  during the baking model; and only 15%-20% is expelled outside which means the balance 85%-80% is recovered and filled up with fresh air by means of the changeover damper.

The inner temperature of the LONGXIANG sanding booth  raises rapidly; Then the heating system will power off at once when it reaches at baking temperature, this will save more energy.

 

Lighting 

The lighting system is provided by four*16W light fixed in the ceiling panels and side walls. They are sealed with 5mm tempered safety glass. LONGXIANG spray booth lighting system is able to supply enough lighting with lower energy consume safely.

 

Filters
The filtering system is made up by high-efficiency filters. The filers hold higher dust retention capacity and lower resistance to the air passage. The long life designing reduces frequency of replacement, which is contributing to reductions in running costs.

 

Warranty 
Our equipments except quick-wear-parts are guaranteed for 12 months from the date of receipt, and the filters and lamps are quick-wear-parts.

Specification of Prep-station (LX-6100)
Inside dimension	6300×3450×2800mm(L×W×H)
Outside dimension	7550×3550×3200mm(L×W×H)
Basement and floor	Without basement
Ceiling system	6400×3550×520mm(L×W×H),with coaming all sides,lighting between the coaming along the length.The back section of the ceiling is sealed by seal plate
Generator setting type	Rear exhaust;square tube frame;white color coated steel
Exhaust system	Generator cabin dimension:2290×1200×1800mm(L×W×H);5.5KW one set inner motor centrifugal fan with air capacity 16000m³/h,belt-drive,electric damper to control the air inlet and outlet volume
Seal type	Back side set 50mm EPS,other 3 sides with PVC soft curtain,curtain color:upper part:white,middle part:transparent,lower part:white
Ceiling installation	Steel rope hanging or steel pole supporting the roof(optional)
Filter system	Fiberglass filter
Lighting system	8 units×3pcs=24×36W;side lights
Control system	Fan switch,lighting switch and electric damper switch
Voltage frequency	380V/3PH or 220V/1PH,50HZ
Total power	6.4KW